3-4 Dell PowerVaultSAN Administrator’sGuide
f. I nstallDell OpenManage Storage Consolidation. For instructions,see Chap-
ter 11,“Installing, Configuring, and Removing MicrosoftWindows
SAN SoftwareComponents.“
g. Install failoversoftware on all servers. The softwaremust be installed in the
followingorder if the server uses both types of storage systems.
1. Install DellOpenManage ATF on all servers to which 650F or 651F LUNs
will be assigned.For instructions, see Chapter 11,“Installing, Configur-
ing, and RemovingMicrosoft Windows SAN Software Components.“
2. Install QLDirecton all servers to which 660F LUNs willbe assigned. For
instructions,see Chapter 11, “Installing, Configuring,and Removing
MicrosoftWindows SAN Software Components.“
3. Connect all SANcables.
a. Connect all switches.
b. Connect all servers.
c. Connect all storage array(s).
d. Connect all bridge(s).
4. Reboot all servers.
5. If you areusing a PowerVault 660F, set the failover path in the QLogicFibre Chan-
nel ConfigurationUtility on the servers that are to be assigned 660F LUNs, and
reboot the server.(Windows 2000 will require an additional reboot when it dis-
covers new devic es.) For instructi ons, see “Configuring QLconfig to Set Primary
and Secondary FailoverPaths for the 660F”in Chapter 11.
6. Install LUN management softwareon all servers.
•On one or two of the servers (two are recommendedfor redundancy) to
which650F or 651F LUNs will be assigned, install Data Managed Node and
either Data Supervisor or Data Administrator.For instructions, see Chapter
11, “Installing, Configuring, and Removing MicrosoftW indows
SAN SoftwareComponents.“
•On one of the servers to which660F LUNs will be assigned, install Dell
OpenManage ArrayManager. For instructions,see Chapter 11, “Installing,
Configuring, and RemovingMicrosoft Windows SAN Software
Components.“

NOTE:You need to install Data Managed Node for 650F and 651Fs and Dell

OpenManage ArrayManager for 660Fs on only one server per zone.

7. Bind or crea te LUNS.
•Bind LUNs in the 650Fand 651Fs. For instructions, see “Managing LUNS in
PowerVault650F,651F,and 630F Storage Systems”inChapter14orseethe

DellOpenManage Data Supervisor, Event Monitor,and Integrator Installation

and Operation

guide or the

DellOpenManage Data Administrator Installation

and Operation Guide

.