support.dell.com
Windows NTand Windows 2000 SAN Configurations 3-5
•Create virtualdisks in the 660Fs. For instructions, see “ManagingLUNs”in
Chapter14orseethe
Dell OpenManage ArrayManager User’sGuide
.
8. Rebootall servers after all LUNs have transitioned to owner status andyou have
verifiedtheir status by using Dell OpenManage Data Supervisor or Dell Open-
Manage Data Administratorfor 650Fs and 651Fs or Dell OpenManage Array
Manager for660Fs.
9. Assign LUNs andv irtualdisks to servers by using Dell OpenManage Storage
Consolidation.For instructions, see the
Dell OpenManageStorage Consolidation
User’sGuide
.
10. Install all system management software.For instructions, see Chapter16,
“ConfiguringSAN Management Applications.”
11. Installselected SAN tape backup software.For instructions, see the software
documentation.
12. Check and, if needed, update all firmwarelevels for the following components.
Foradditional information, see Chapter 9, “Upgra ding YourD ell PowerVault Fibre
Channel Softwareand Firmware”or see the suggested documentation.
•All PowerVault50F,51F,and 56F Fibre Channel switches —For information
about determiningthe firmware levels, see the documentation that came
with yourswitch.
•All PowerVault650F,651F,and 630F storage arrays —For informationabout
determining the firmwa re levels, see the
Dell OpenManage Data Supervisor,
Event Monitor,and Integrator Installation and Operation
guide. Forinstalla-
tion instructions, see Chapt er 10,“Installing and Configuring Hardware
Devicesin a Wi ndowsSAN.”
•All PowerVault660F storage systems—For installation instructions, seethe
Dell OpenManage ArrayManager User’s Guide
.
•All hard-diskdrives in your storage systems —For information,see the
Dell PowerVaultFibre Channel Utilities CD
or the File Library at
http://support.dell.com.
•All PowerVault120T autoloaders—For instructions, see Chapter 10, ”Install-
ing and ConfiguringHardware Devices in a Windows SAN.“
•All PowerVault130T libraries —Forinstructions, see Chapter 10,”Installing
and ConfiguringHardware Devices in a Windows SAN.“
•All PowerVault35F Fibre Channel bridges —For instructions,see Chapter
10, ”Installing and Configuring HardwareDevices in a Windows SAN.“