NOTE: If your computer supports a white DVI connector, unscrew and detach the blue (VGA) cable from the monitor and then connect the White DVI cable to the monitor and the white DVI connector on your computer.
NOTE: Do not connect both the blue VGA and the White DVI cables to the computer at the same time. All monitors ship with the VGA(blue) cable attached by default.
2.Connect either the white (digital
Connecting the white DVI cable
Connecting the blue VGA cable
NOTE: The Graphics are used for the purpose of illustration only. Appearance of the computer may vary.
Connecting the USB cable
After you have completed connecting the DVI/VGA cable, follow the procedure below to connect the USB cable to the computer and complete your monitor setup:
1.Connect the upstream USB port (cable supplied) to an appropriate USB port on your computer.
2.Connect USB peripherals to the downstream USB ports (side or bottom) on the monitor. (See side or bottom view for details.)
3.Plug the power cables for your computer and monitor into a nearby outlet.
4.Turn on the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display an image, see Solving Problems.
5.Use the cable slot on the monitor stand to organize the cables.
