|
|
|
|
|
|
|
| Wide Mode | Adjust the image ratio as 4:3 or full screen. |
|
| ||
|
|
|
|
|
|
|
| Horizontal P |
|
|
|
|
|
| osition | Use the | or | buttons to adjust image left and right. Minimum is '0' | ||
|
|
|
|
|
|
|
| Vertical Posit |
|
|
|
|
|
| ion | Use the | or | buttons to adjust image up and down. Minimum is '0' | ||
|
|
|
|
|
|
|
| Sharpness |
|
|
|
|
|
|
| This feature can make the image look sharper or softer. Use | or | to adjust the sharpness from '0' to '100'. | ||
|
|
| ||||
| Pixel Clock | The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. These settings are accessed through the | ||||
|
| main OSD menu, by selecting 'Image Settings'. |
|
| ||
|
| Use the | or | buttons to adjust for best image quality. |
|
|
|
|
| ||||
| Phase | If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase | ||||
|
| (fine), again. |
|
|
|
|
|
| NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input. | ||||
|
|
| ||||
| Dynamic | Allows you to increase the level of contrast to provide sharper and more detailed image quality. | ||||
| Contrast |
|
|
|
|
|
|
| NOTE: 1. DCR works only in “video mode” and in the “game” color preset. | ||||
|
| 2. The brightness functionality is disabled when DCR is activated. |
| |||
|
|
|
|
| ||
| Reset | Select this option to restore default display settings. |
|
| ||
| Display |
|
|
|
|
|
| Settings |
|
|
|
|
|
| OTHER | Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on | ||||
| SETTINGS | screen, and so on. |
|
|
| |
|
|
| ||||
|
|
| ||||
| Language | Language option to set the OSD display to one of seven languages (English, Espanol, Francais, Deutsch, Russian ,Simplified chinese | ||||
|
| or Japanese). |
|
|
|
|
|
|
|
|
|
|
|
| Menu Transp |
|
|
|
|
|
| arency | Select this option to change the menu transparency by pressing | or | (Minimum: 0 ~ Maximum: 100). | ||
|
| |||||
|
|
| ||||
| Menu Timer | OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button. | ||||
|
| Use the | or | buttons to adjust the slider in 5 second increments, from 5 to 60 seconds. | ||
|
|
| ||||
| Menu Lock | Controls user access to adjustments. When 'Lock' is selected, no user adjustments are allowed. All buttons are locked except the | ||||
|
| menu | button. |
|
| |
|
|
|
|
|
|
|
