Installing Upgrades 69
3Press the module straight down into the socket until the securing clips
snap into place at the ends of the module.
Installing a Memory Module
Disk Drives and Media

Installing a CD, Zip, or Other Externally Accessible Drive in a

Mini Tower Chassis

CAUTION: Before you perform this procedure, see "Safety First—
For You and Your Computer."
1Turn off the computer and peripherals, disconnect them from their
electrical outlets, wait at least 5 seconds, and then remove the
computer cover.
2Rotate the power supply away from the system board.
3Remove the front panel.
4Remove the drive bracket from the chassis drive bay you want to use.
Squeeze together the metal tabs that extend from each side of the
drive bracket, and pull the bracket out of the bay (see the following
figure).
slots (2)
securing clips (2)