Installing Upgrades 81
remove the four screws that secure the drive in the bracket (see the
following figure).
5Unpack the drive and prepare it for installation.
NOTICE: Ground yourself by touching an unpainted metal surface on the
back of the computer.
See the documentation that accompanied the drive to verify that the
drive is configured for your computer. Change any settings necessary
for your configuration.
6Slide the drive into one of bracket bays, oriented so that the
connectors on the back of the drive will face the interior of the chassis
when the bracket is reinstalled (see the following figure).
7Align the screw holes of the drive and bracket, and secure the drive in
the bracket using the screws that came with the upgrade kit (see the
following figure).
Installing a Hard Drive in the Bracket (Mini Tower Chassis)
screws (4)
drive
drive bracket