3.Disconnect the I/O board cable and lift the I/O board from the computer.
Installing the Input/Output (I/O) Board
1.Insert the I/O board into the chassis.
2.Connect the I/O board cable to the system board.
3.Install:
a.palmrest assembly
b.keyboard
c.memory module
d.hard drive
e.WLAN card
f.access panel
g.
h.battery
4.Follow the procedures in After Working Inside Your Computer.
Removing the Speakers
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.battery
b.optical– disk drive
c.access panel
d.hard drive
e.memory module
f.keyboard
g.palmrest assembly
21
