Dell 3445 owner manual Installing the Power Connector

3.Disconnect the power connector from the system board (1) and un-thread the cable from the retaining clips (2). Then, lift the power connector and cable off the computer.

Installing the Power Connector

1.Insert the power connector into its slot on the chassis and guide the cable into the retaining tabs.

2.Connect the power connector cable to the system board.

3.Install:

a.palmrest assembly

b.keyboard

c.memory module

d.hard drive

e.WLAN card

f.access panel

g.optical-disk drive

h.battery

4.Follow the procedures in After Working Inside Your Computer.

31