Dell 3500 specifications Security, Boot, Exit, Power Management, Post Behaviour, Wireless

	Allows the clock speed of the processor to be
EIST	dynamically changed by software while minimizing	Default: Enabled
	power draw and heat dissipation.
Execute Disable Bit	Allows increased protection against buffer overflow	Default: Enabled
	attacks.
	Allows a platform to run multiple operating systems
Intel® Virtualization	and applications in independent partitions, allowing	Default: Disabled
Technology	one computer to function as multiple virtual
	computers.
Power Management
	Allows USB devices to wake-up the computer from
USB Wake Support	standby. This feature is enabled only when the	Default: Enabled
	AC adapter is connected.
	Allows the computer to be remotely turned on. This
Wake On LAN	feature is enabled only when the AC adapter is	Default: Enabled
	connected.
Post Behaviour
Adapter Warnings	Enables or disables adapter warnings.	Default: Enabled
	Allows the System Setup to skip certain tests
Fast Boot	during power on self test (POST) which decreases	Default: Enabled
	the amount of time needed to boot the computer.
Keyboard Click	Enable or disable the keyboard sound.	Default: Disabled
Wireless
Internal Bluetooth	Enable or disable the Bluetooth module.	Default: Enabled
Internal WLAN	Enable or disable the wireless LAN module.	Default: Enabled
Internal WWAN	Enable or disable the wireless WAN module.	Default: Enabled

Security

The Security tab displays the security status and allows you to manage the security features of the computer.

Security

Service Tag	Displays the current service tag of the computer.
Asset Tag	Displays the asset tag.
Unlock Setup Status	Specifies whether a setup password has been
	assigned.
Admin Password Status	Specifies whether an admin password has been
	assigned.
Admin Password	Allows you to set an admin password.
System Password Status	Specifies whether a system password has been
	assigned.
System Password	Allows you to set a system password.
Password on Boot	Enable or disable authentication every time your
	computer boots.
Password Bypass	Allows you to bypass the system and hard drive
	passwords when your computer restarts.
	However, you must enter the passwords if you are
	turning the computer on from the shutdown state.
Password Change	Enable or disable the password change feature.
Computrace	Enable or disable the Computrace feature on your
	computer.
HDD Password Configuration	Allows you to set a password on the computer's
	internal hard drive (HDD). The hard drive password is
	enabled even when the hard drive is installed on
	another computer.

Boot

The Boot tab allows you to change the boot sequence.

Exit

This section allows you to save, discard, and load default settings before exiting from System Setup.

Back to Contents Page