Lincoln Electric SVM145-B service manual Semiautomatic Welding Accessories

C-3 C-3

ACCESSORIES

Return to Master TOC

Return to Master TOC

SEMIAUTOMATIC WELDING ACCESSORIES

LN-7 OR LN-8 WIRE FEEDERS - Semiautomatic, con- stant speed wire feeders. For CV operation only.

LN-23P WIRE FEEDER - This portable wire feeder is capable of CV operation. K350-1 Adapter Kit is required.

LN-25 WIRE FEEDER - The LN-25 with or without an external contactor may be used with the Commander 300.

NOTE: Gas-shielded welding requires a Magnum Gun. Gasless welding requires an Innershield Gun.

OTHER WIRE FEEDERS FOR THE COMMANDER 300

•NA-3 Automatic Wire Feeder

•LN-142 Semiautomatic Wire Feeder(requires optional K1597-1 42VAC Transformer Kit).

CONNECTION OF LINCOLN ELECTRIC WIRE FEEDERS

WARNING

ELECTRIC SHOCK can kill.

•Do not operate with panels open.

•Disconnect NEGATIVE (-) BATTERY LEAD before servicing.

•Do not touch electrically live parts. MOVING PARTS can injure.

•Keep guards in place.

•Keep away from moving parts.

•Only qualified personnel should install, use or service this equip- ment.

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

HIGH FREQUENCY GENERATORS FOR TIG APPLICATIONS

The K799 Hi-Freq Unit and the K930-ALL TIG Modules are suitable for use with the Commander 300. The Commander 300 is equipped with the required RF bypass circuitry for the connection of high frequency generating equipment. The high frequency bypass network supplied with the K799 Hi-Freq Unit does NOT need to be installed into the Commander 300.

The Commander 300 and any high frequency-generat- ing equipment must be properly grounded. See the K799 Hi-Freq Unit and the K930-AII TIG Module oper- ating manuals for complete instructions on installation, operation, and maintenance.

COMMANDER 300