Section TOC
Master TOC
TROUBLESHOOTING & REPAIR
CASE COVER REMOVAL AND REPLACEMENT PROCEDURE (continued)
Return to
Return to Section TOC
Return to Section TOC
Return to
Return to Master TOC
Return to Master TOC
REASSEMBLY PROCEDURE
1.Output panel: Set the panel in place.
2.Install the five screws that mount the panel at the top and bottom.
3.Attach the green ground lead.
4.Install the internal leads to the output termi- nals.
5.Side panels, roof and door assembly: Remove the fuel cap. With the help of an assistant, carefully set the roof/door assem- bly in place. Replace the fuel tank gasket and the lift bail cover seal. Replace the fuel cap. Install the exhaust pipe rain cap.
6.Install the right rear panel and the right and left front panels. Raise the control panel front and install the two screws at the roof and the two at the sides.
7.Install the support rod and the
Return to Section TOC
Return to Master TOC
