Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
|
|
|
|
| ||
TROUBLESHOOTING & REPAIR |
|
| ||||
Observe Safety Guidelines |
|
| TROUBLESHOOTING GUIDE | |||
detailed in the beginning of this manual. |
|
|
|
| ||
|
|
|
| |||
PROBLEMS | POSSIBLE AREAS OF | RECOMMENDED |
| |||
(SYMPTOMS) | MISADJUSTMENT(S) | COURSE OF ACTION | ||||
|
|
|
|
|
|
|
|
| FUNCTION PROBLEMS |
|
|
|
|
The wire feeder does not work | 1. | Check the circuit breaker (CB5). | 1. Check for | the presence of | ||
when connected to the welder |
| Reset if tripped. |
| 115VAC at leads #31(J) and | ||
amphenol. | 2. | The wire feeder control cable |
| #32(A) at the | ||
|
|
|
|
| ||
|
| may be faulty. | 2. | If the 115VAC is NOT present at | ||
| 3. | The wire feeder may be faulty. |
| the | amphenol, check | |
|
| leads #31 and #32 for loose or | ||||
|
|
|
| |||
|
|
|
| faulty connections. | See the | |
|
|
|
| Wiring Diagram. |
| |
|
|
| 3. Perform the Stator Voltage | |||
|
|
|
| Test. |
|
|
|
|
|
|
| ||
The battery does not stay charged. | 1. | Check for loose or faulty con- | 1. | The battery charging circuit may | ||
|
| nections at the battery and |
| be faulty. | See | the Wiring |
|
| engine charging system. |
| Diagram. |
|
|
| 2. | The battery may be faulty. |
|
|
|
|
|
| Check or replace. |
|
|
|
|
|
|
|
|
|
|
|
CAUTION
If for any reason you do not understand the test procedures or are unable to perform the test/repairs safely, contact the Lincoln Electric Service Department for electrical troubleshooting assistance before you proceed. Call
