OPERATION
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
ADDITIONAL DESIGN FEATURES
•Deutz
•Engine protection system shuts the engine down for low oil pressure, high oil temperature, or a broken fan/engine alternator belt.
•Gauges for oil pressure, oil temperature, engine alternator output and fuel level.
•Indicator lights for low oil pressure, high oil tempera- ture, engine alternator low output/broken belt and low fuel level (on
•Automatic low fuel shutdown before running out of fuel
•Engine hour meter standard on all models.
•Extended range 25 gallon (94.6 I) fuel tank.
•Automatic idler reduces engine speed when not welding or drawing auxiliary power. This feature reduces fuel consumption and extends engine life.
•Compact size fits crosswise in full size
•Copper alternator windings and high temperature insulation for dependability and long life.
•New paint system on case and base for outstanding corrosion protection.
STANDARD MODEL
The
A field installed Dual Output Meter and Gauge Kit
300.The kit includes dual output meters, oil pressure gauge, oil temperature gage, and alternator ammeter.
WELDING CAPABILITY
The Commander 300 is rated 300 amps, 32 VDC at 100% duty cycle and 375 amps, 34 VDC at 60% duty cycle. The maximum open circuit voltage at 1900 RPM is 87 volts. The weld current is variable from 30 to 375 amps.
CONTROLS AND SETTINGS
The welder/generator controls are located on the case front panel. Diesel engine idler control, start/stop con- trols, welding output terminals and ground stud are also on the case front. See Figure B.1 and the expla- nations that follow.
Return to Section TOC
Return to Master TOC
