Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
TROUBLESHOOTING & REPAIR
STATOR/ROTOR REMOVAL AND REPLACEMENT (continued)
FIGURE F.49 – LIFT FRAME AND ASSOCIATED COMPONENT REMOVAL
LIFT FRAME
WELDMENT
FIREWALL
FUEL TANK
SUPPORTS
FAN BAFFLE
BASE
Return to Section TOC
Return to Master TOC
In steps 21 – 25, the lift frame weldment, fuel tank supports, and fan baffle are removed as a unit. See Figure F.49.
21.Using the 3/8" wrench, remove the two bolts (at top) that hold the firewall to the lift frame weldment.
22.Using the 1/2" wrench, remove the two bolts (at bottom) that hold the firewall to the lift frame weldment.
23.With the 3/8" wrench, remove the nuts, lock washers, and flat washers from the two studs that hold the fan baffle to the machine base.
24.Using the 3/4" wrench, remove the four bolts, lock washers, and nuts from the bot- tom of the lift frame weldment.
25.Carefully remove the lift frame weldment, fuel tank supports, and attached fan baffle. You will need to lift the fan baffle off the two studs on the machine base, then cock it slightly to remove it.
