C-2

C-2

ACCESSORIES

Return to Master TOC

Return to Master TOC

OPTIONS/ACCESSORIES

The following options/accessories are available for your Commander 300 from your local Lincoln Distributor.

FIELD INSTALLED OPTIONS

K802R POWER PLUG KIT - Provides a plug for each receptacle.

K857 25 ft. (8.5 m) or K857-1 100 ft. (30.4 m) REMOTE CONTROL - Portable control provides same dial range as the output control on the welder from a location up to the specified length from the welder. Has convenient plug for easy connection to the welder. The Commander 300 is equipped with a 6-pin connector for connecting the remote control and a toggle switch for selecting “LOCAL” output control or “REMOTE” output control.

K704 ACCESSORY SET - Includes 35 feet (10 m) of electrode cable and 30 feet (9 m) of work cable, head- shield, work clamp and electrode holder. Cable is rated at 500 amps, 60% duty cycle.

K953-1 TWO-WHEEL TRAILER - For road, in-plant and yard towing. Road towing with optional fender and light kit. (For highway use, consult applicable federal, state and local laws regarding possible additional requirements.)

K1596-1 DUAL OUTPUT METERS AND GAUGES -

Dual output meters provide preset ability of voltage for wire welding and current for stick welding. Measures both current and voltage when welding. Gauges include battery ammeter, engine temperature, and engine oil pressure. Fuel gauge is not available in kit form.

K1597-1 42 VAC TRANSFORMER KIT - For products

requiring 42 VAC power source.

STICK WELDING ACCESSORIES

K704 Accessory Kit, which includes:

Electrode holder and cable.

Ground clamp and cable.

Headshield.

TIG WELDING ACCESSORIES

Magnum TIG Torch

Magnum Parts Kit and Argon gas

K930-ALL TIG Module (not required for scratch-start DC TIG welding)

K936-1 Control Cable

K870 Foot Amptrol

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

K953-1 Trailer

K958-1 Ball Hitch

K958-2 Lunette Eye Hitch

K959-1 Fender & Light Kit

K965-1 Cable Storage Rack

K887-1 ETHER START KIT - Provides maximum cold weather starting assistance for frequent starting below 10( F (-12.2( C). Required Ether tank is not provided with kit.

K1604-1 OIL DRAIN KIT - Includes ball valve, hose and clamp.

K1690-1 (2 DUPLEXES) GFCI KIt - Includes a UL approved 115 volt ground fault circuit interrupter recep- tacle (duplex type) with covers and installation instruc- tions. Each half of the receptacle is rated 15 amps, but the maximum total current from the GFCI duplex is lim- ited to 20 amps. The GFCI receptacle replaces the factory installed 115 volt duplex receptacle.

S24647 SPARK ARRESTER

Also available:

K963-1/-2 Hand Amptrol

K814 Arc Start Switch

K937-22 Control Cable Extension

K937-45 Control Cable Extension

K844-1 Water Valve

COMMANDER 300

Page 30
Image 30
Lincoln Electric SVM145-B service manual Options/Accessories, Field Installed Options