Dell 3U083 Attaching the Stand to the Mounting Plate

18 Setup and Quick Reference Guide
www.dell.com | support.dell.com
5Insert the tabs into the slots and slide the piece toward the diagnostic
lights (see the illustration).
6Install a security device in the security cable slot (optional).
To remove the cable cover, remove the device installed in the security cable
slot (optional).
1Grasp the top piece of the cable cover and slide it to the left until it
stops, and then lift it up and away.
2To remove the bottom piece of the cable cover, while pressing the
lever, slide the piece to the left until it stops, and then lift it up and
away.
Attaching the Stand to the Mounting Plate
NOTICE: When installing the computer in the hanging orientation, avoid
locations where it will be bumped by a user’s legs or chair.
CAUTION: Attach the mounting plate to a solid surface capable of
supporting 40 lbs (18.1 kg) hanging weight.
7
3U083ebk1.book Page 18 Thursday, February 6, 2003 1:38 PM