Dell 3U083 manual Attaching the Stand, Connecting the AC Adapter

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

3 Attaching the Stand

NOTE: If you are installing the computer under a desktop or tabletop, first attach all cables, and then attach the stand to the mounting plate (see "Attaching the Stand to the Mounting Plate" on page 18).

NOTE: The power adapter LED will light when the adapter is properly plugged into a wall outlet and into the computer.

1Raise the captive screw and slide the chassis stand slat into one of three mounting slots on the back of the computer.

2When the stand is in place, tighten the screw.

NOTICE: If your computer is oriented under a desktop or tabletop and is in a high-vibration environment, use the optional wall-mount bracket instead of the computer stand.

4 Connecting the AC Adapter

1Connect the power adapter to the connector on the back of the computer.

2Connect the power cable to the power adapter.

NOTICE: The following steps apply to Japan only.

14

Setup and Quick Reference Guide