Using the Dell OpenManage Server Assistant CD 2-1

&+$37(5

8VLQJWKH'HOO2SHQ0DQDJH6HUYHU$VVLVWDQW&'
This chapter describes the bootable Dell OpenManage Server Assistant CD and the
system management tasks you can perform with the CD to configure and maintain your
system. This chapter also describes the bootable utility partition installed on your sys-
tem that provides many of the same functions and utilities as the Dell OpenManage
Server Assistant CD.

%RRWLQJ)URPWKH&'

The system must be running to insert the Dell OpenManage Server Assistant CD. To
boot from the CD, insert it into the PowerEdge 4350 systems CD-ROM drive and
press <Ctrl><Alt><Del>. When the system boots, the CD main menu appears.
If the CD does not boot, check the following settings:
In the System Setup program, the Secondary SCSI option must be set to On
and the Boot Sequence option must be set to Diskette First (both of these set-
tings are the defaults for their respective categories). See Chapter 4, Using the
System Setup Program, for more information.
In the SCSISelect utility, the BIOS Support For Bootable CD-ROM option must
be set to Enabled.
See Chapter 3, Installing and Configuring SCSI Drivers, for
more information.

1DYLJDWLQJWKH&'0HQXV

Selections can be made from the CD menus using either a keyboard or a mouse.
Associated help information is displayed in the help box at the bottom of the screen in
the currently selected language (specified via a menu option).
Click Back to return to the previous menu. Click Exit (or press <Alt><x>) to exit the
program. Exiting the program causes the system to reboot to the standard
operating-system boot partition.
3502Ebk0.book Page 1 Friday, November 13, 1998 10:00 AM