‡If the system has been exposed to abnormally cold temperatures, allow a two- hour warm-up period to bring it up to normal operating temperature before turning it on. Failure to do so may cause damage to internal components, particu- larly the hard-disk drive.

‡If intermittent system failures are noticed, try reseating any socketed chips, which might have become loose due to temperature fluctuations.

+XPLGLW\

High-humidity conditions can cause moisture migration and penetration into the sys- tem. This moisture can cause corrosion of internal components and degradation of properties such as electrical resistance, thermal conductivity, physical strength, and size. Extreme moisture buildup inside the system can result in electrical shorts, which can cause serious damage to the system.

Each Dell system is rated to operate at 8 to 80 percent relative humidity, with a humidity gradation of 10 percent per hour. In storage, a Dell system can withstand from 5 to 95 percent relative humidity.

Buildings in which climate is controlled by air-conditioning in the warmer months and by heat during the colder months usually maintain an acceptable level of humidity for system equipment. However, if a system is located in an unusually humid location, a dehumidifier can be used to maintain the humidity within an acceptable range.

$OWLWXGH

Operating a system at high altitude (low pressure) reduces the efficiency of forced and convection cooling and can result in electrical problems related to arcing and corona effects. This condition can also cause sealed components with internal pres- sure, such as electrolytic capacitors, to fail or perform at reduced efficiency.

Each Dell system is rated to operate at altitudes from –16 to 3048 meters (m) (–50 to 10,000 feet [ft]) and can be stored at altitudes of –16 to 10,600 m (–50 to 35,000 ft).

'XVW￿DQG￿3DUWLFOHV

A clean operating environment can greatly reduce the negative effects of dust and other particles, which act as insulators and interfere with the operation of a system’s mechanical components. Also, in addition to regular cleaning, you should follow these guidelines to deter contamination of the system equipment:

‡Do not permit smoking anywhere near the system.

‡Do not permit food or drink near the system.

‡Use dust covers when the system is not in use.

‡Keep all diskettes in a closed diskette box when not in use.

‡Close windows and outside doors to keep out airborne particles.

Maintaining the System C-5

Page 102 Page 104
Page 103
Image 103
Dell 4350 manual +Xplglw, $Owlwxgh, XVWDQG3DUWLFOHV
Page 102 Page 104

4350 specifications

The Dell PowerEdge R4350 is a versatile 2U rack server designed to meet the demands of modern data centers, particularly those requiring a compact yet powerful solution. Tailored for businesses seeking efficient performance in various applications, this server balances exceptional processing power, memory, and storage flexibility.

One of the standout features of the R4350 is its dual Intel Xeon Scalable processors, which dramatically improve performance with up to 28 cores per processor. This scalability enables enterprises to handle a wide range of workloads, from virtualized environments to in-memory databases and analytics. The server supports up to 1.5TB of DDR4 memory, allowing for extensive data processing and quick access to information, a crucial factor for operations requiring high availability and responsiveness.

The R4350's flexible hard drive configuration further enhances its appeal. It accommodates up to ten 2.5-inch drives or four 3.5-inch drives, providing users with various storage options to suit different requirements. With support for both SAS and SATA drives, users can prioritize performance or capacity, depending on their specific use cases. The server also supports RAID configurations, contributing to data integrity and redundancy.

In terms of connectivity, the Dell R4350 features multiple PCIe slots, enabling users to expand their systems with additional I/O options or enhance capabilities with accelerator cards, such as GPUs, to support high-performance computing workloads. The integrated 10GbE networking capabilities ensure fast data transfer and seamless integration into existing infrastructures.

The R4350 is designed with manageability and security in mind. Featuring Dell EMC OpenManage technology, it offers a user-friendly interface for monitoring and managing hardware components efficiently. Security is bolstered through features like Secure Boot and hardware TPM, providing peace of mind regarding data protection.

Additionally, the PowerEdge R4350 integrates advanced thermal management technologies for efficient cooling, ensuring optimal performance even under heavy workloads. Its compact 2U design allows for easy installation in various rack environments, maximizing space utilization without sacrificing processing capabilities.

In summary, the Dell PowerEdge R4350 combines powerful processing, expansive memory, versatile storage options, and advanced management capabilities, making it a formidable choice for businesses looking to enhance their IT operations. With its focus on performance, reliability, and security, the R4350 stands out as a robust solution for the ever-evolving demands of modern computing.
Top Page Image Contents