Installing and Configuring SCSI Drivers3-21
3. Copy the Support Pack file to a volume on the server.
4. Expand the file by typing LZVSEH[H, and press <Enter>.
5. Follow the directions in the iwsp5b.txt file included with the
Support Pack.
When Support Pack 5 has been applied, you can install SMP on your system.
,QVWDOOLQJ6036XSSRUW
NOTE: Before SMP can be installed on your system, you must apply the IntranetWare
Support Pack 4 or later to the IntranetWare operating system. See Installing the Dell-
Supplied Novell Patches and Support Pack 5 found earlier in this chapter.
To add SMP support to your IntranetWare installation, follow these steps:
1. Start IntranetWare.
2. At the IntranetWare console prompt, type /RDGLQVWDOO and press <Enter>.
3. From the installation screen that appears, select Multi CPU Options and press
<Enter>.
4. From the SMP Installation Options screen, select Select a Platform Support-
Module and press <Enter>.
5. From the Select a Driver screen, select MPS14.PSM and press <Enter>.
A confirmation screen asks if you want to load the selected module.
6. Select Yes and press <Enter>.
A message screen appears.
7. Press <Enter> to continue and then <Alt><Esc> to exit to the console prompt.
8. Type GRZQ to down the server and then H[LW to exit to MS-DOS.
9. Reboot the system to enable SMP support.
8VLQJVWDUWXSQFIDQGDXWRH[HFQFI
The startup.ncf and autoexec.ncf files contain a set of commands that are executed
during the boot routine. The startup.ncf file contains commands to load the disk driv-
ers. Once startup.ncf loads disk drivers, control is passed to the autoexec.ncf file to
complete the boot routine. For additional information on the startup.ncf and
autoexec.ncf files, refer to your IntranetWare documentation.
To automatically load the aic78u2.ham driver during the boot routine, the startup.ncf
file must contain a load command line that specifies the location of the driver on the
hard-disk drive and any available options. To find the slot number, type ORDG
D?QZVHUYHU?DLFXKDP at the console prompt and press <Enter>. A list of
3502Ebk0.book Page 21 Friday, November 13, 1998 10:00 AM