Dell 4600C Technical Specifications

Back to Contents Page

Technical Specifications
Dell™Dimension™4600CServiceManual
Microprocessor
System Information
Expansion Bus
Memory
Drives
Ports and Connectors
Video
Audio
Network
Controls and Lights
Power
Physical
Environmental




Microprocessor
Microprocessor
type
Intel®Pentium®4 with HT Technology that runs at 2.40, 2.60, 2.80, 3.00, or 3.20 GHz internally and 800 MHz externally or 2.26, 2.40,
2.53, 2.66, 2.80, or 3.06 GHz internally and 533 MHz externally
NOTE: Not all Pentium 4 processors support Hyper-Threading technology.
Intel Celeron®D processor 325, 330, or 335
NOTE: Dell™Dimension™4600CcomputerswithIntelCeleronprocessorsareavailableonlyinJapan.
L1 cache
8 KB first-level
L2 cache
256-KB, 512-KB, or 1-MB pipelined-burst, eight-way set associative, write-back SRAM
System Information
System chip set
Intel 865G
DMA channels
four
Interrupt levels
24 APIC mode
System BIOS chip
4 Mb (512 KB)
System clock
533- or 800-MHz quad-data rate
Expansion Bus
Bus types
PCI and AGP
Bus speed
PCI: 33 MHz
AGP
AGP 1X, 4X, 8X
AGP connector
one low profile
AGP connector size
172 pins
AGP connector data width (maximum)
32 bits
AGP video bus protocols
4x mode at 1.5 V
PCI connectors
one low profile
PCI connector size
120 pins
PCI connector data width
(maximum)
32 bits
Memory
Architecture
DDR SDRAM
Memory connectors
two
Memory capacities
128-, 256-, 512-MB, and 1-GB non-ECC DDR SDRAM
Minimum memory
256 MB
Maximum memory
2 GB