Memory Riser Board Replacement 17
Removing Memory Riser Boards CAUTION: Before you perform this procedure, see
"Precautionary Measures."
1Remove the microprocessor airflow shroud.
2Remove the memory riser board retention bracket (see the following
figure).
aLift the retention bracket up to disengage it from the chassis.
bLift the bracket away from the chassis.
NOTICE: To avoid damage to the memory riser board, press the securing clips
with equal force applied at each end of the memory socket.
3Remove memory riser board A:
NOTE: To access the securing clips on the system board memory sockets,
it may be necessary to remove the fan for microprocessor 0. For
instructions on removing and installing the processor fan, see the
Service Manual
.
aPress the securing c lips of system boa rd memory socke t 1 outward
simultaneously until riser board A pops out slightly from the
socket.
bLift riser board A away from the retention brackets on riser
board B.
4Remove memory riser board B:
aPress the securing cl ips of system boa rd memory socket B o utward
simultaneously until riser board B pops out slightly from the
socket.
bLift riser board B away from socket 2.