Dell 6800 manual LCD Status Messages Line Causes Corrective Actions E0276, E0412 RPM FAN n, E0780

Table 1-3. LCD Status Messages (continued)

Line 1	Line 2	Causes	Corrective Actions
Message	Message
E0276	VRM # PG	The voltage of the specified VRM	See "Troubleshooting the
		is out of acceptable range.	Microprocessors" in your
			Installation and Troubleshooting
			Guide. If the problem still
			persists, see "Getting Help"
			in your Installation
			and Troubleshooting Guide.
E0276	VCACHE # PG	The voltage of the specified	See "Troubleshooting the
		VCACHE is out of acceptable	Microprocessors" in your
		range.	Installation and Troubleshooting
			Guide. If the problem still
			persists, see "Getting Help"
			in your Installation
			and Troubleshooting Guide.
E0276	PS AC CURRENT	Power supply AC current is out	See "Troubleshooting Power
		of acceptable range.	Supplies" in your Installation
			and Troubleshooting Guide.

E0276	PS OVER CURRENT Power supply current is out
	of acceptable range.

See "Troubleshooting Power Supplies" in your Installation and Troubleshooting Guide.

E0412 RPM FAN PS BLANK Power supply fan RPM is out of acceptable range.

See "Troubleshooting System Cooling Problems" in your Installation and Troubleshooting Guide.

E0412	RPM FAN n	Specified cooling fan is faulty,	See "Troubleshooting System
	FAN REDUNDANCY	improperly installed, or missing.	Cooling Problems" in your
			Installation and Troubleshooting
	LOST
			Guide.
E0780	PROC # CONFIG	The specified processor has	See "Troubleshooting the
	ERR	a configuration error.	Microprocessors" in your
			Installation and Troubleshooting
			Guide.
E0780	PROC # DISABLED	The specified processor is	See "Troubleshooting the
		disabled.	Microprocessors" in your
			Installation and Troubleshooting
			Guide.

Information Update

9