Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display
Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor
installations are automatic; you can select different settings if desired. For more information about changing the monitor settings, see Operating the Monitor.
Universal Serial Bus (USB) Interface
This section gives you information about the USB ports that are available on the left side of your monitor.

USB Upstream Connector

Pin
Number
20-pin Side of the Connected Signal Cable
1
ML0(p)
2
GND
3
ML0(n)
4
ML1(p)
5
GND
6
ML1(n)
7
ML2(p)
8
GND
9
ML2(n)
10
ML3(p)
11
GND
12
ML3(n)
13
GND
14
GND
15
AUX(p)
16
GND
17
AUX(n)
18
HPD
19

DP_PWR Return

20

+3.3V DP_PWR

NOTE: This monitor supports High-Speed Certified USB 2.0 interface.
Transfer Speed
Data Rate
Power Consumption
High speed
480 Mbps
2.5W(Max,eachport)
Full speed
12 Mbps
2.5W(Max,eachport)
Low speed
1.5 Mbps
2.5W(Max,eachport)