Dell 8600 manual If you are replacing a memory module, remove the existing module

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

8If you are replacing a memory module, remove the existing module:

a Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.

b Remove the module from the connector.

securing clips

(2 per connector)

memory module

NOTICE: If you need to install memory modules in two connectors, install a memory module in the connector labeled “DIMM A” before you install a module in the connector labeled “DIMM B.” Insert memory modules at a 45-degree angle to avoid damaging the connector.

116

Adding and Replacing Parts