Dell 8T146 manual Frequently Asked Questions

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Light Pattern	Problem Description	Suggested Resolution
GGGG	Normal operating	None.
	condition after POST.

If a computer problem occurs that you are unable to resolve through the steps in this section or the procedures in "Finding Solutions" in your User’s Guide, complete the following steps before you contact Dell:

1Write a detailed description of the error, beep code, or diagnostic light problem.

2Record your Express Service Code and Service Tag.

3Contact Dell from the same location as your computer.

Frequently Asked Questions

How Do I...	Solution	Where to Find Additional
		Information

Set up my computer to use two monitors?

If your computer has the required graphics card to support dual- monitor setup, then look in your box for a Y-cable. The cable has a single connector on one end (plug this connector into the back panel) and branches into two connectors (plug these connectors into the monitor cables). See "Connect the monitor" on page 11.

Connect my monitor when the	If your graphics card has a DVI	Contact Dell Technical Support
monitor cable connector doesn’t	connector but your monitor has a	for more information.
seem to fit the connector on the	VGA connector, then you need to
back of my computer?	use an adapter. An adapter should
	be included in the box.

30

Setup and Quick Reference Guid e