Dell 9.7(0.0) Manage VLANs using SNMP

MIB Object OID Description

chSysCoresStackUnitNumber 1.3.6.1.4.1.6027.3.25.1.2.8.1.4 Contains information that

includes which stack unit or

processor the core file was

originated from.

chSysCoresProcess 1.3.6.1.4.1.6027.3.25.1.2.8.1.5 Contains information that

includes the process names that

generated each core file.

• To view the viewing the software core files generated by the system, use the following command.

snmpwalk -v2c -c public 192.168.60.120 .1.3.6.1.4.1.6027.3.10.1.2.10

enterprises.6027.3.10.1.2.10.1.1.1.1 = 1

enterprises.6027.3.10.1.2.10.1.1.1.2 = 2

enterprises.6027.3.10.1.2.10.1.1.1.3 = 3

enterprises.6027.3.10.1.2.10.1.1.2.1 = 1

enterprises.6027.3.10.1.2.10.1.2.1.1 = "/CORE_DUMP_DIR/flashmntr.core.gz"

enterprises.6027.3.10.1.2.10.1.2.1.2 = "/CORE_DUMP_DIR/FTP_STK_MEMBER/

f10cp_l2mgr_131108080758_Stk1.acore.gz"

enterprises.6027.3.10.1.2.10.1.2.1.3 = "/CORE_DUMP_DIR/FTP_STK_MEMBER/

f10cp_vrrp_140522124357_Stk1.acore.gz"

enterprises.6027.3.10.1.2.10.1.2.2.1 =

"/CORE_DUMP_DIR/FTP_STK_MEMBER/f10cp_sysd_140617134445_Stk0.acore.gz"

enterprises.6027.3.10.1.2.10.1.3.1.1 = "Fri Mar 14 11:51:46 2014"

enterprises.6027.3.10.1.2.10.1.3.1.2 = "Fri Nov 8 08:11:16 2013"

enterprises.6027.3.10.1.2.10.1.3.1.3 = "Fri May 23 05:05:16 2014"

enterprises.6027.3.10.1.2.10.1.3.2.1 = "Tue Jun 17 14:19:26 2014"

enterprises.6027.3.10.1.2.10.1.4.1.1 = 0

enterprises.6027.3.10.1.2.10.1.4.1.2 = 1

enterprises.6027.3.10.1.2.10.1.4.1.3 = 1

enterprises.6027.3.10.1.2.10.1.4.2.1 = 0

enterprises.6027.3.10.1.2.10.1.5.1.1 = "flashmntr"

enterprises.6027.3.10.1.2.10.1.5.1.2 = "l2mgr"

enterprises.6027.3.10.1.2.10.1.5.1.3 = "vrrp" Hex: 76 72 72 70

enterprises.6027.3.10.1.2.10.1.5.2.1 = "sysd" Hex: 73 79 73 64

The output above displays that the software core files generated by the system.

Manage VLANs using SNMP

The qBridgeMIB managed objects in Q-BRIDGE-MIB, defined in RFC 2674, allows you to use SNMP to

manage VLANs.

To create a VLAN, use the dot1qVlanStaticRowStatus object.

The snmpset operation shown in the following example creates VLAN 10 by specifying a value of 4 for

instance 10 of the dot1qVlanStaticRowStatus object.

Example of Creating a VLAN using SNMP

> snmpset -v2c -c mycommunity 123.45.6.78 .1.3.6.1.2.1.17.7.1.4.3.1.5.10 i 4

SNMPv2-SMI::mib-2.17.7.1.4.3.1.5.10 = INTEGER: 4

860 Simple Network Management Protocol (SNMP)