View Advanced Interface Information
The following options have been implemented for the show [ip | running-config] interfaces
commands for (only) linecard interfaces.
When you use the configured keyword, only interfaces that have non-default configurations are
displayed. Dummy linecard interfaces (created with the linecard command) are treated like any other
physical interface.
Examples of the show Commands
The following example lists the possible show commands that have the configured keyword available:
Dell#show interfaces configured
Dell#show interfaces linecard 0 configured
Dell#show interfaces tengigabitethernet 0 configured
Dell#show ip interface configured
Dell#show ip interface linecard 1 configured
Dell#show ip interface tengigabitethernet 1 configured
Dell#show ip interface br configured
Dell#show ip interface br linecard 1 configured
Dell#show ip interface br tengigabitethernet 1 configured
Dell#show running-config interfaces configured
Dell#show running-config interface tengigabitethernet 1 configured
In EXEC mode, the show interfaces switchport command displays only interfaces in Layer 2 mode
and their relevant configuration information. The show interfaces switchport command displays
the interface, whether it supports IEEE 802.1Q tagging or not, and the VLANs to which the interface
belongs.
Dell#show interfaces switchport
Name: TengigabitEthernet 13/0
802.1QTagged: True
Vlan membership:
Vlan 2
Name: TengigabitEthernet 13/1
802.1QTagged: True
Vlan membership:
Vlan 2
Name: TengigabitEthernet 13/2
802.1QTagged: True
Vlan membership:
Vlan 2
Name: TengigabitEthernet 13/3
802.1QTagged: True
Vlan membership:
Vlan 2
--More--

Configuring the Interface Sampling Size

Although you can enter any value between 30 and 299 seconds (the default), software polling is done
once every 15 seconds. So, for example, if you enter “19”, you actually get a sample of the past 15
seconds.
All LAG members inherit the rate interval configuration from the LAG.
Interfaces 437