Dell Dell XPS 8300 Clearing Forgotten Passwords, Changing Boot Sequence for Future Boots, 110

1If you are booting from a USB device, connect the USB device to a USB connector.

2Turn on (or restart) your computer.

3When F2 Setup, F12 Boot Options appears in the lower-right corner of the screen, press <F12>.

NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop. Then shut down your computer and try again.

The Boot Device Menu appears, listing all available boot devices.

4On the Boot Device Menu choose the device you want to boot from.

For example, if you are booting to a USB memory key, highlight USB Storage Device and press <Enter>.

NOTE: To boot to a USB device, the device must be bootable. To ensure your device is bootable, check the device documentation.

Changing Boot Sequence for Future Boots

1Enter system setup utility (see "Entering System Setup Utility" on page 103).

2Use the arrow keys to highlight the Boot menu option and press <Enter> to access the menu.

NOTE: Write down your current boot sequence in case you want to restore it.

3Press the up- and down-arrow keys to move through the list of devices.

4Press plus (+) or minus (–) to change the boot priority of the device.

Clearing Forgotten Passwords

WARNING: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.

WARNING: The computer must be disconnected from the electrical outlet to clear the password setting.

CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty.

110

System Setup Utility