12
Bluetooth Assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
WARNING: Do not operate your computer with any cover(s) (including computer covers, bezels, filler brackets,
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty.
Removing the Bluetooth Assembly
1Follow the instructions in "Before You Begin" on page 13.
2Remove the computer cover (see "Removing the Computer Cover" on page 17).
3Remove the front bezel (see "Removing the Front Bezel" on page 27).
4Disconnect the Bluetooth assembly cable from the system board connector F_USB4 (see "System Board Components" on page 10).
5Press in on the tab as shown in the illustration and pull the Bluetooth assembly away from the front panel.
6Carefully slide and remove the Bluetooth assembly cable through the slot in the front panel.
Bluetooth Assembly
69
