Back to Removing and Replacing Parts
ATG Port Cover
Dell™Latitude™E6410/E6410ATGServiceManual
Removing the ATG Port Cover
1. Follow the procedures in Before Working Inside Your Computer.
2. Pry and remove the ATG port cover away from the base of the computer.
Replacing the ATG Port Cover
To replace the ATG port cover, perform the above steps in reverse order.
Back to Removing and Replacing Parts
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe®Flash®Player from Adobe.com in order to view the illustrations below.