Installing the Display Panel | Dell E6440 instruction

5.Peel off the LVDS cable-connector tape and disconnect the LVDS cable from the display panel. Remove the display panel from the display assembly.

Installing the Display Panel

1.Connect the LVDS cable and stick the LVDS cable-connector tape.

2.Flip the display and place it in the display assembly.

3.Tighten the screws to secure the display panel to the display assembly.

4.Install:

a.display bezel

b.display assembly

c.base corner caps

d.base cover

e.display-hinge cap

f.battery

5.Follow the procedures in After Working Inside Your Computer.

46

Image 46

Dell E6440 owner manual Installing the Display Panel

Contents

Regulatory Model P38G Regulatory Type P38G001 Dell Inc. All Rights Reserved Contents System Setup Diagnostics Technical Specifications Contacting Dell Page Working on Your Computer Before Working Inside Your Computer Turning Off Your Computer Click Shut Down After Working Inside Your Computer Page Removing and Installing Components System Overview Installing the Secure Digital SD Card Removing the Secure Digital SD Card Installing the Battery Installing the ExpressCardRemoving the Battery Removing the ExpressCard Removing the Base Cover Installing the Base CoverRemoving the Memory Installing the Memory Removing the Hard Drive Installing the Hard Drive Removing the Optical Drive Installing the Optical Drive Removing the Keyboard Trim Installing the Keyboard Trim Removing the KeyboardPage Installing the Keyboard Removing the Wlan Card Installing the Wlan Card Removing the Wwan Card Installing the Base Corner Caps Installing the Wwan CardRemoving the Base Corner Caps Removing the Network Connector Installing the Network Connector Installing the Coin-Cell Battery Removing the Coin-Cell BatteryRemoving the Heatsink Assembly Installing the Heatsink Assembly Removing the Power Connector Installing the ProcessorRemoving the Processor Page Installing the Display-Hinge Cover Installing the Power ConnectorRemoving the Display-Hinge Cover Removing the Palmrest Assembly Installing the Palmrest Assembly Removing the ExpressCard Cage Installing the ExpressCard Cage Removing the WiFi-Switch Board Installing the WiFi-Switch Board Removing the System BoardPage Installing the System Board Installing the Speakers Removing the Speakers Removing the I/O Board Installing the I/O Board Removing the Display Assembly Installing the Display Assembly Removing the Display Bezel Installing the Display Bezel Removing the Display Panel Flip the display panel over Installing the Display Panel Installing the Display Hinges Removing the Display Hinges Installing the Camera Removing the Camera Navigation Keys Boot SequenceKeys Navigation System Setup Options Date/Time Advanced Boot OptionsOption Description Option Description Integrated NIC USB PowerShare Enable Smart ReportingUSB Configuration Unobtrusive Mode Enter the old password Security featuresDrive does not have a password set by default Enter the new password Password Change Password ConfigurationPassword Bypass Allow Non-Admin Password Changes Default Setting Option Description Multi Core Support Default Setting Enable Intel SpeedStepExpert key Management Intel SpeedStep Auto On Time Wireless Radio ControlOption Description AC Behavior USB Wake Support Primary Battery Charge Advanced Battery ChargeConfiguration Battery Slice Charge Option Description Wireless Switch Option Description Extend Bios Post TimeEnable Intel Virtualization Technology Default Setting Wireless Device Enable Click Drivers & Downloads Updating the BiosSystem and Setup Password Computer Press Y to save the changes. The computer reboots Enhanced Pre-Boot System Assessment ePSA Diagnostics Device Status Lights Storage LED Power LED Wireless LED Fault Description Battery Status LightsAlternately Technical Specifications Feature Specification Features Specification UMA Memory card reader Support upto SD4.0 Battery Environmental Page Contacting Dell