Option

Description

 

 

 

 

Legacy (Default Setting)

 

UEFI

Advanced Boot Options

Enable Legacy Option ROMs (enable by

 

default)

Date/Time

Allows you to set the date and time.

Table 3. System Configuration

 

 

 

 

Option

Description

 

 

Integrated NIC

Allows you to configure the integrated

 

network controller. The options are:

 

Disabled

 

Enabled

 

Enabled w/PXE (Default Setting)

 

• Enable UEFI Network Stack - If this option

 

 

is enabled, UEFI networking protocols are

 

 

installed/available, allowing pre-OS and

 

 

early OS networking features to use any

 

 

enabled NICs. This may be used without

 

 

PXE turned on.

Parallel Port

Allows you to define and set how the parallel

 

port on the docking station operates. You can

 

set the parallel port to:

 

Disabled

 

AT (Default Setting)

 

PS2

 

ECP

Serial Port

Identifies and defines the serial port settings.

 

You can set the serial port to:

 

Disabled

 

COM1 (Default Setting)

 

COM2

 

COM3

 

COM4

 

 

NOTE: The operating system may

 

 

allocate resources even if the setting is

 

 

disabled.

SATA Operation

Allows you to configure the internal SATA

 

hard-drive controller. The options are:

 

Disabled

 

ATA

 

AHCI

 

RAID On (Default Setting)

51

Page 51
Image 51
Dell E6440 owner manual Advanced Boot Options, Date/Time, Option Description Integrated NIC, Parallel Port, Serial Port