5. Lift the system board from the computer.

Installing the System Board

1. Place the system board to align with the ports on the computer.
2. Connect the WiFi-Switch board cable to the system board and tighten the screws to secure the system board.
3. Connect the following cables to the system board:
a. speaker
b. coin-cell battery
4. Install:
a. ExpressCard cage
b. palmrest assembly
c. processor
d. heatsink assembly
e. WWAN
f. WLAN card
g. memory
h. coin-cell battery
i. power connector
j. base corner caps
k. base cover
l. display-hinge cover
m. optical drive
n. hard drive
o. keyboard trim
p. keyboard
q. battery
r. ExpressCard
s. SD card
5. Follow the procedures in
After Working Inside Your Computer
.
36