4.Perform the following steps as shown in the illustration:
a.Lift the latch that secure the keyboard cable to the computer [1].
b.Disconnect the keyboard cable the computer [2].
5.Flip the computer and remove the screws that secure the keyboard to the computer.
6.Perform the following steps as shown in the illustration:
a.Slide the keyboard from the computer [1].
b.Lift the keyboard from the computer [2].
Installing the Keyboard
1.Connect the keyboard cable and tighten the screw that secures the keyboard to the computer.
2.Slide the keyboard into its compartment and ensure that it clicks into place.
3.Flip the computer, place the keyboard, and tighten the screws that secure the keyboard to the computer.
4.Install:
a.keyboard trim
b.base cover
c.battery
5.Follow the procedures in After Working Inside Your Computer.
