Installing the WWAN Card
1.Place the WWAN card in its slot in the system board.
2.Press the WWAN card down and tighten the screw to secure the WWAN card to the computer.
3.Connect the antenna cables to their respective connectors marked on the WWAN card.
4.Install:
a.base cover
b.SD card
c.battery
5.Follow the procedures in After Working Inside Your Computer.
Removing the Display Bezel
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the battery.
3.Pry the edges of the display bezel. Remove the display bezel from the display assembly.
Installing the Display Bezel
1.Align the display bezel in place and snap it in place.
2.Align the hinge covers on display assembly and snap it in place.
3.Install the battery
4.Follow the procedures in After Working Inside Your Computer.
Removing the Display Panel
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.battery
b.display bezel
