Dell E7240 owner manual Post Behavior

Option	Description
	• Disabled - Does not allow the system to power on by special LAN
		signals when it receives a wake-up signal from the LAN or wireless
		LAN. (Default Setting)
	• LAN Only - Allows the system to be powered on by special LAN
		signals.
	•	WLAN Only
	•	LAN or WLAN
	• LAN with PXE Boot
Block Sleep	Allows you to block the computer from entering into the sleep state.
	Option is disabled by default.
	•	Block Sleep (S3)
Peak Shift	Peak Shift can be used to minimize AC consumption during peak powers
	times of day. Set the start and end time to run in Peak Shift mode.
	• Enable Peak Shift (Disabled)
Advanced Battery Charge	Allows batteries in the system in Advanced Battery Charge Mode to
Configuration	maximize battery health. This uses standard charging algorithm and
	other techniques during non-work hours to maximize battery health
	• Enable Advanced Battery Charge Mode(Disabled)
Primary Battery	Allows you to define how to use the battery charge, when AC is plugged
Configuration	in. The options are:
	•	Adaptive(Enabled)
	•	Standard Charge
	•	Express Charge
	•	Primary AC Use
	• Custom Charge — you can set the percentage to which the battery
		must charge.
Intel Smart Connect	The option is disabled by default. If option enables will periodically sense
Technology	nearby wireless connection while the system is asleep. It will synchronize
	emails or social media application that were open when system entered
	the sleep state.
	•	Smart Connection(Disabled)
Table 9. POST Behavior
Option	Description
Adapter Warnings	Allows you to activate the adapter warning messages when certain
	power adapters are used. The option is enabled by default.
	•	Enable Adapter Warnings
Keypad (Embedded)	Allows you to choose one of two mode it enable the keypad that us
	embedded in the internal keyboard.
	•	Fn Key Only
	•	By Numlock