14
Note: Cable lengths should be used which allow for routing horizontally around to the side of the chassis before bending upward or downward in the rack.
3 Management Tools Overview
3.1Updating Firmware
The switch is delivered with the latest Firmware. New firmware versions are issued as development progresses. When new firmware becomes available Mellanox will notify customers, and the new firmware image will be found on the Mellanox firmware download page.
You will need the Mellanox Firmware Tools package to update firmware for this switch. It can be downloaded from:
http://www.mellanox.com/products/management_tools.php
Note: Don’t forget to set the flag for IBspark when you install the MFT kit.
Firmware for this switch can be updated by going to the site below and following the directions for burning new firmware.
The latest firmware can be found at:
http://www.mellanox.com/support/firmware_download.php
Rev 1.0 | Mellanox Technologies |
