Dell M410HD Adjusting the Projected Image

Using Your Projector 15
3To power off the projector quickly, press the Power button and hold for 1
second while the projector’s cooling fans are still running.
NOTE: Before you turn on the projector again, wait for 60 seconds to allow the
internal temperature to stabilize.
4Disconnect the power cord from the electrical outlet and the projector.
Adjusting the Projected Image
Raising the Projector Height
1Press the Elevator button.
2Raise the projector to the desired display angle, and then release the button to
lock the elevator foot into position.
3Use the tilt adjustment wheel to fine-tune the display angle.
Lowering the Projector Height
1Press the Elevator button.
2Lower the projector, and then release the button to lock the elevator foot into
position.
1Elevator button
2Elevator foot (Angle of tilt: 0 to 9.5 degree)
3Tilt adjustment wheel
3 3
1
2