Management: Installing Array Components 245
If the drive is online, the green
activity/
fault indicator flashes as the drive
is powered down. When the drive indicators are off, the drive is ready for
removal.
3Press the release button to open the drive carrier release handle. See
Figure16-4.
4
Slide the hard drive out until it is free of the drive bay.
CAUTION: To maintain proper system cooling, all empty hard-drive bays must
have drive blanks installed.
5
Insert a drive blank in the empty drive bay. See"Installing a Hard-Drive
Blank" on page 244.
6
If applicable, replace the front bezel. See "Installing the Front Bezel" on
page 242.
Figure 16-4. Removing and Installing a Hard Drive
1 release button 2 hard-drive carrier handle
1
2
book.book Page 245 Tuesday, June 18, 2013 3:03 PM