Dell MD3600f, MD3620F Removing Copy Pairs

182 Configuration: PremiumFeature—Virtual Disk Copy
Removing Copy Pairs
You can remove one or more virtual disk copies by using the Copy Manager.
Any virtual disk copy-related information for the source virtual disk and the
target virtual disk is removed from the Virtual Disk Properti es dia log and th e
Storage Array Profile dialogs. When you remove a virtual disk copy from the
storage array, the Read-Only attribute for the target virtual disk is also removed.
After the virtual disk copy is removed from the Copy Manager, you can either
select the target virtual disk as a source virtual disk or the target virtual disk for
a new virtual disk copy. If you remove a virtual disk copy, the source virtual disk
and the target virtual disk are no longer displayed in the Copy Manager.
Keep these guidelines in mind when you remove copy pairs:
• Removing copy pairs does not delete the data on the source virtual disk or
target virtual disk.
• If the virtual disk copy has a status of
In Progress , you must stop the
virtual disk copy before you can remove the copy pair.
To remove copy pairs:
1
In the AMW, select Virtua l Disk  Copy Manager .
The
Copy Manager window is displayed.
2 In the table, select one or more copy pairs.
3 Select Copy  Remove Copy Pairs .
The
Remove Copy Pairs dialog is displayed.
4 Click Yes .
book.book Page 182 Tuesday, June 18, 2013 3:03 PM