1 | screws (4) | 2 | display cable |
|
|
|
|
3 | 4 | display assembly | |
|
|
|
|
Replacing the Display Assembly
1.Follow the instructions in Before You Begin.
2.Place the display assembly in position and replace the four screws (two on each side) that secure the display assembly to the computer base.
3.Route the display cable into the routing guide and connect the cable to the connector on the system board.
4.Connect the
5.Turn the computer over and replace the two screws at the bottom of the computer.
6.Replace the palm rest (see Replacing the Palm Rest).
7.Replace the keyboard (see Replacing the Keyboard).
8.Replace the optical drive (see Replacing the Optical Drive).
9.Replace memory module(s) (see Replacing the Memory Module(s)).
10.Replace the base cover (see Replacing the Base Cover).
11.Replace the battery (see Replacing the Battery).
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.
Display Bezel
Removing the Display Bezel
CAUTION: The display bezel is extremely fragile. Be careful when removing it to prevent damaging the bezel.
1. Follow the instructions in Before You Begin.
