Gas Range Surface Operation 10
Surface Burners
Aspark electrode ignites each surf ace burner. This control
eliminates the need for continuous open flame pilots. For
added safety and convenience, e ach burner is designed
with an electronic reignition system. This feature enables
any burner to relight automatically in the event it is acci-
dentally extinguished.
BURNER ASSEMBLY
After removing burner parts for cleaning, it is important
that you reassemble the burners c orrectly.R efer to the
illustrations below for proper alignment of the base and
upper burner parts. The center burner cap does not have
a special orientation but should be seated flat.
Failure to position the burner parts correctly could
cause flames or gas to escape and burn between
parts, resulting in poor combustion or damage to your
gas range.
IGNITER
CROSS
RING
CENTER
CAP
BURNERBASE
Burner base. Upper burner.
CENTERCAP
OUTER
BURNERRING DRIPPAN
IGNITER
GRATE PLACEMENT
Position the porcelain-coated , cast iron burner grates with
the five fingers of each grate faci ng toward the front of the
gas range. The back of each grate has t hree fingers. Refer
to the illustration below.
Grate placement.