68 Using Cards
www.dell.com | support.dell.com
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide
and see "Before Working Inside Your Computer" on page112.
To install a PC Card:
1
Hold the card with its orientation symbol pointing into the slot and the top side of the card
facing up. The latch may need to be in the "in" position before you insert the card.
2
Slide the card into the slot until the card is completely seated in its connector.
If you encounter too much resistance, do not force the card. Check the card orientation and
try again.
The computer recognizes most PC Cards and automatically loads the appropriate device driver. If
the configuration program tells you to load the manufacturer's drivers, use the floppy disk or CD
that came with the PC Card.
To install an ExpressCard:
1
Place the ExpressCard in the PC Card adapter (the adapter is included with the
ExpressCard).
2
Install the ExpressCard with adapter the same way as a PC Card (see "PC Cards" on page67).
1PC Card
1