Adding and Replacing Parts 189
NOTE: The coin-cell battery is secured to the system board with double-sided tape.
6
Lift the coin-cell battery up and off the system board.
7
Remove the tape securing the coin-cell battery to the system board.
8
Disconnect and remove the coin-cell battery cable from the power
connector on the system board.
Replacing the Coin-Cell Battery
1
Connect the coin-cell battery cable to the system board.
2
Place the coin-cell battery on the system board in the location marked .
3
Replace the modem (see "Modem" on page177).
4
Replace the cover and tighten the screws.
book.book Page 189 Wednesday, September 16, 2009 11:12 AM