Dell
The adapter brackets kit includes 6 brackets to accommodate different rail lengths, plus four sets of custom screws in common thread sizes. See Figure 17. A detailed Getting Started Guide is included in the kit along with directions for installing the brackets and mounting the rails into the brackets.
Depending on the depth of the rack used, it may be necessary to remove the server’s bezel in order to close the door of the rack. A minimum of 58 mm will be needed between the back surface of the door panel and the front face of the EIA flange for the front door to close with the 11G server bezel installed.
Figure 17. 2U Threaded Rack Adapter Brackets Kit
13.2.2 Static Rails
The static rails support a wider variety of racks than the sliding rails but do not support serviceability in the rack and are thus not compatible with the CMA. See Figure 18.
Figure 18. R515 Static Rails
46
PowerEdge R515 Technical Guide
