Dell R710 Optical Drive, Replacing the Fan Bracket, 103, Fan connector on system board

Figure 3-14. Removing and Installing the Processor Fan Bracket

1

2

4

	3
1	fan bracket	2	release latch
3	fan connector on system board	4	mounting pin

Replacing the Fan Bracket

1Align the fan bracket down onto the bracket base so that the mounting pins fit correctly into the bracket base. See Figure 3-14.

2Insert the bracket and engage the release levers to lock it in place.

3If removed, replace the fans in the fan bracket. See "Replacing a Cooling Fan."

4Close the system. See "Closing the System."

Optical Drive

An optional slimline DVD-ROM or DVD+RW optical drive slides into the front panel and connects to the SATA controller on the system board. The optical drive is on the right or left side of the system, depending on your chassis.

Installing System Components

103