Installing System Components 111
8
Insert the assembled blank tray into the flex bay and slide the unit in until
the locking mechanism engages.
9
Close the system. See "Closing the System."
10
Reconnect your system and peripherals to their electrical outlets, and turn
on the system.
Figure 3-19. Removing and Installing the Tape Backup Unit
Integrated Storage Controller Card
Your system includes a dedicated expansion-card slot on riser 1 for an
integrated storage controller card that provides the storage subsystem for your
system’s internal hard drives. The controller supports SAS and SATA hard
drives and also enables you to set up the hard drives in RAID configurations
as supported by the version of the storage controller included with your
system.
1 tape backup unit 2 interface/power cable
3 power cable for optical drive 4 mounting tray release tab (2)
4
12
3