Dell SCv2080 manual Ddic

LED Indicators

	• One single-color LED indicator for drawer 2 fault status
Drawer	• One single-color LED indicator for sideplane card and power status
	• One single-color LED indicator for drawer fault status
	• One single-color LED indicator for logical fault status
	• One single-color LED indicator for cable fault status
	• Six single-color LED indicators for data transfer status
Disk Drive In Carrier	One single-color LED for drive fault status
(DDIC)
6 Gb SAS IO module	14 one-color LED status indicators, four each for the three SAS ports and two
	for the module status
Cooling module	• One single-color LED indicator for module status
	• One single-color LED indicator for battery fault status (not currently used)
	• One single-color LED indicator for fan fault status

Power Supply Unit (PSU) • One single-color LED indicator for PSU fault status

•One single-color LED indicator for AC power fault status

•One single-color LED indicator for power status

Power Supplies

AC power supply (per power supply)

Wattage	2.8 kW
Voltage	200–240 VAC (16 A)
Heat dissipation	191-147 W
Input frequency	50/60 Hz
Max input power	1791 VA
Input current	7.4 A@241 VAC
Maximum inrush current	Under typical line conditions and over the entire system ambient operating
	range, the inrush current may reach 55 A per power supply for 10 ms or less
Available Hard Drive Power (per Slot)
Supported hard drive	Up to 1.16 A at +5 V
power consumption	Up to 1.6 A at +12 V
(continuous)
I/O Card Power (per Slot)
Maximum power	11 W at +12 V
consumed by I/O Card
Maximum available	100 W at +12 V
power

21