Dell ST2E manual Computrace Service from Absolute Software, Strong Password Password Configuration

Option	Description
	Click OK after entering the password details.
System Password	Allows you to set, change, or delete the computer password (previously called the
	primary password).
	The drive does not have a password set by default.
	To add a new password:
	• Enter the old password
	• Enter the new password
	• Confirm the new password

Strong Password Password Configuration

Click OK after entering the password details.

Enable strong password - This option is disabled by default.

This field controls the minimum and maximum number of characters allowed for the admin and system passwords. Changes to these fields are not active until they are committed via the apply button or saving changes before exiting setup.

• Admin Password Min

• Admin Password Max

• System Password Min

• System Password Max

Password Change	Allows you to determine whether changes to the system and hard disk passwords are
	permitted when an administrator password is set.
	• Allow Non-Admin Password Changes (Default)
Non-Admin Setup Changes	This option lets you determine whether changes to the setup options are permitted
	when an administrator password is set.
	• Allow Wireless Switch Changes (Default)
TPM Security	This option lets you control whether the Trusted Platform Module (TPM) in the system
	is enabled and visible to the operating system.
	TPM Security (Default)
		NOTE: Activation, deactivation, and clear options are not affected if you load the
		setup program's default values. Changes to this option take effect immediately.
PTT	Allows you to enable or disable PTT Support.
	•	PTT Security (Default)
	•	Revoke Trust (Default)
Computrace (R)	This field lets you activate or disable the BIOS module interface of the optional
	Computrace Service from Absolute Software.
	•	Deactivate (Default)
	•	Disable
	•	Activate

24